v1/sylphase-usbgpsimu4-raw_config_provider.html

Usage: sylphase-usbgpsimu4-raw [OPTION]...


Allowed options:

  --help  produce help message

  --antenna-position arg

          antenna position as a 3-length JSON array (example: [0.5,2,3])

  --antenna-axis arg

          antenna axis as a 3-length JSON array (example: [0,0,1])

  --gpio0-stamp-falling

          stamp falling edges of GPIO0 input (default: stamp rising edges)

  --gpio0-stamp-decimation N (=1)

          only stamp every Nth rising edge (i.e. 0th, Nth, 2*Nth, ...)

  --gpio0-frequency arg (=5000000)

          GPIO0 frequency in Hz (used to calculate Time offset)

  --gpio1-stamp-falling

          stamp falling edges of GPIO1 input (default: stamp rising edges)

  --gpio1-stamp-decimation N (=1)

          only stamp every Nth rising edge (i.e. 0th, Nth, 2*Nth, ...)

  --gpio1-frequency arg (=5000000)

          GPIO1 frequency in Hz (used to calculate Time offset)

  --device-id arg

          open device with this serial number or product number (example: SN4000 or usbgpsimu4.2)

  --require-device-immediately

          require device to be captured immediately or exit

  --print-serial-number-and-exit

          open device as normal but immediately exit after printing serial number

  --full-bandwidth

          output full bandwidth streams rather than mixed/decimated streams

  --sample-grabber-divide-override arg

          override sample grabber sample rate division ratio